6.7.2 Sensor Data Tab
The Sensor Data tab shows current sensor data used by WASSP. The latest 10 seconds of Roll, Pitch
and Heave information of the vessel are drawn on the scrolling graph. Vessel Heading, Speed over
Ground and the current UTC Time and Date are also represented on this display.
If vital sensor information is missing, the Status will read RED, and will show what sensor is required.
Pause the
display
6.8
This display shows the IQ and magnitude of the received signal on each channel.
Refer to section "8.1.2 Commissioning Step 2: Channel Gain" on page 39 of the
Installation Manual for further information.
40
Cursor
information
overlay
Pitch
Roll
signal
signal
Heave
signal
Figure 21. Raw Info - Sensor Data Tab
IQ Bars
Figure 22. IQ Bars display
www.wassp.com
Vertical (Y)
Scale
Doc. P/N:
WSP-009-008
Version:
Issue Date:
April 2014
V1.3