Table of Contents
Advertisement
WMB-X230 Technical Specifications
Dimensions
BTxR: Height: 180 mm
Width: 221.5 mm
Length: 535 mm
WASSP Processor
Serial Ports:
4 - Motion / Position Sensors
Ethernet Ports:
2 - BTxR / Secondary Network
Displays:
1 or 2 - Owner supplied
Minimum Resolution: 1024x768
Recommended Resolution: 1920x1080
Inputs:
USB Keyboard + Mouse / Trackball
Storage:
SSD + HDD (System Dependent)
BTxR
Output power:
14 power settings from 40 W to 1.5 kW.
Ping rate:
Automatic, determined by depth.
Frequency:
160 kHz (WMB-3230)
80kHz (WMB-5230)
Beam width:
112 beams at 1.07º over 120º port/
starboard swath, Transmit 4º fore/aft,
Receive 10º fore/aft.
Maximum depth:
Display
Display Range:
5 - 400m (WMB-3230)
5 - 800m (WMB-5230)
Display Modes:
Sonar view
Single / Triple beam view
Sidescan view
2D Charting view
3D Charting view
Display Layouts:
For both Acoustic and Charting:
Single screen
Vertical split screen
Horizontal split screen
3-screen
Advance speed:
Slow – fast (5 speeds).
WASSP Ltd.
Phone: +64 9 373 5595
65 Gaunt Street
Fax:
Westhaven
Email: wassp@wassp.com
Auckland 1010
N
Z
ew
ealaNd
PO Box 5849
Auckland 1141
160kHz
Height: 94 ± 2 mm
(WMB-3230)
Width: 164 ± 2 mm
Transducer:
Length: 327 ± 2 mm
Specifications subject to change without notice.
WASSP Ltd. reserves the right to change this manual
without notice.
+64 9 379 5655
The information in this manual may not, in whole or in part, be
copied, reproduced, photocopied, translated, or reduced to
any electronic medium or machine readable form without the
prior written consent of WASSP Ltd.
w ww. wa s s p. co m
80kHz
(WMB-5230)
Transducer:
Interface
Inputs:
TSS1, PSXN, PASHR, HDT, HDG,
VTG, RMC, GGA, GGL, ZDA, PFEC-
Gpatt, PFEC-Gphve.
Key Pulse
Outputs:
Olex
Sodena
MaxSea
Key Pulse
Recording:
Realtime bathymetry mapping
Raw Data
XYZ (ASCII)
Power Supply
24 V DC, 100 W.
BTxR:
6 - 30 V DC, ship's supply.
WASSP Processor:
Environmental
Temperature:
0 to 40 ºC.
Relative humidity:
5 to 95% non condensing.
Vibration:
IEC 60945, protected equipment.
Weight
BTxR:
10 kg
Transducer:
WMB-3230:
12 kg incl. 10m cable
WMB-5230:
39 kg incl. 20m cable
Processor:
5.7 kg
Equipment List
Standard:
See "APPENDIX B - Part Numbers"
on page 67 of the Installation
Manual for a full list.
Transducer:
Mounting options for through hull or
pole mounted.
BTxR
WASSP
Processor
Glands:
Options for alloy, steel or plastic.
Options:
See "APPENDIX B - Part Numbers"
on page 67 of the Installation
Manual for a full list.
COPYRIGHT © 2014 WASSP LTD.
ALL RIGHTS RESERVED.
Height: 130 ± 3 mm
Width: 336 ± 2 mm
Length: 527 ± 2 mm
Advertisement
Table of Contents
