Suzuki EN125-2A Service Manual page 37

3-5 ENGINE
Remove the tachometer cable.
Take off the left and right caps of the cylinder
head cover.
Remove the exhaust pipe nuts and muffler
mounting bolt, then take off the muffler.
Remove engine mounting bolts, swing arm pivot
nut, footrest bar bolts and brackets.
Use both hands, and lift the engine from the
frame.
NOTE:
The engine must be taken out from the right
side.
CAUTION:
Be careful not to draw out the swing arm
pivot shaft completely from the left side
swing arm pivot hole. Insert the shaft or rod
into the right side pivot hole from the right
side of the frame to keep the alignment of the
frame holes and swing arm pivot holes.