Speedometer Gear Box - Suzuki EN125-2A Service Manual

5-3 CHASSIS
REASSEMBLY
Reassemble and remount the front wheel and
front brake in the reverse order of disassembly
and removal, and also carry out the following steps:
BRAKE DISC
Make sure that the brake disc is clean and free
of any greasy matter, After securing it in place
by tightening its bolts, be sure to lock with
specified torque.
Tightening torque
NOTE:
Always use new lock washers.
Bend the washer to the bolts.
WHEEL BEARING
Apply grease to the bearings before installing.
SUZUKI SUPER
GREASE "A"
Install the wheel bearings by using the special
tool.
Bearing installer

SPEEDOMETER GEAR BOX

Before installing the speedometer gear box
grease it and align groove
with two drive pawls
drive gear box.
SUZUKI SUPER
GREASE "A"
When tightening the front axle, check to be sure
that the speedometer gear box is in the position
shown.
15 25 N m
(1.5 2.5 kg m)
99000-25010
09913-75820
on the wheel hub
on the speedometer
99000-25010