Suzuki EN125-2A Service Manual page 27

PERIODIC MAINTENANCE AND TUNE-UP PROCEDURES 2-14
REAR BRAKE
Bring the brake pedal to a position about 10 mm
(behind the frame). This is effected by turning the
Ù
brake pedal stopper after remove the two
screws and take off the right cover. Be sure to
tighten the lock nut securely after setting the bolt.
H
Rear brake height
H 10 mm
After adjusting the rear brake height, adjust the
brake pedal travel. First set the pedal at a position
for comfortable riding by turning the brake pedal
Ù -
stopper , and then adjust the free travel to 20
30 mm.
If adjustment is necessary, turn the rear brake
1
adjuster to obtain the specific play.
-
Brake pedal travel
20 30 mm
3
2