Suzuki EN125-2A Service Manual page 86

STARTER IDLE GEAR AND MOTOR
Install the starter idle gear.
Install the starter motor.
DRIVESHAFT OIL SEAL AND
ENGINE SPROCKET
CAUTION:
Always replace the driveshaft oil seal with
*
a new one every disassembly to prevent
oil leakage. Also grease the oil seal lip. On
installation, refer to Fig. for correct
position and direction.
Replace "O" ring with a new one every
*
disassembly.
NOTE:
After reassembling the LOWER END COM-
PONENTS, install the O-ring and spacer.
Oil seal
O-ring
ENGINE 3-54