Suzuki EN125-2A Service Manual page 83

3-51 ENGINE
Assemble the clutch, in the reverse order of
disassembly. Pay attention to the following points.
When inserting spacer on countershaft, apply a
small quantity of engine oil to both inside and
outside of the spacer.
Tighten clutch sleeve hub nut using the special
tool to the specified torque;
Clutch sleeve hub
holder
Tightening
torque
Be sure to lock the nut by firmly bending the
tongue of the washer.
Install drive plates and driven plates to the
sleeve hub.
Insert push rod in the countershaft.
Tighten clutch spring bolts diagonally.
09920-53710
-
30 50 N m
-
(3.0 5.0 kg m)
Cam side
Longer
Push Piece
side
Shorter