Expansion Memory - Toshiba PORTEGE S100 Maintenance Manual

4 Replacement Procedures
4.5

Expansion memory

Removing the expansion Memory Module
To remove the expansion memory module, make sure the computer is in boot mode and
powered off, follow the steps below and refer to Figure 4-4.
CAUTION: The power must be turned off when you remove/insert the memory module.
1. Turn over the computer.
2. Loosen the screw (with e-ring) fixing the memory slot cover and remove the
memory slot cover.
3. Press the two latches outward and remove the memory module.
Screw (with e-ring)
4-12
Downloaded from LpManual.com Manuals
Removing/inserting a memory module with the power on might damage the
module or the computer itself.
Never press hard or bend the memory module.
Latch
Figure 4-4 Removing the expansion memory module
4.5 Expansion memory
Memory slot cover
Latch
Memory module
PORTEGE S100 Maintenance Manual (960-508)