Toshiba PORTEGE S100 Maintenance Manual page 161

3.25 Floppy Disk Drive Utilities
3. COPY program
(a) When COPY is selected, the following message appears.
(b) Selecting a media/drive type number will display a message similar to the one
(c) Remove the Diagnostics Disk from the FDD, insert the source disk and press
(d) The following message will appear.
(e) Remove the source disk from the FDD, then insert a formatted work disk and
(f) When the amount of data is too large to be copied in one operation, the
(g) To copy another disk, type 1 and the message from step (a) is displayed again.
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
FLOPPY DISK FORMAT & COPY : VX.XX
Type select (0:2DD,3:2HD) ?
below.
Insert source disk into drive A:
Press any key when ready.
any key. The following message will appear, indicating the program has
started.
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR
Copy start
Insert target disk into drive A:
Press any key when ready.
press any key. The following message will appear and start copying to the
target disk.
message from step (b) is displayed again. After the floppy disk has been
copied, the following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
Entering 2 returns the test program to the DIAGNOSTIC MENU.
= XXX
= X
= XX
[[ track,head = XXX X ]]
[[ track,head = XXX X ]]
3 Tests and Diagnostics
3-63