4.29 Fluorescent Lamp
Removing the bezel
1. Turn the LCD module face up with the insulation sheets on it.
2. Release the four latches of the bezel and frame (1) in figure 4-55. Lift up the bezel
from the bottom side (FL lamp side) (2) in figure 4-55. Remove the bezel while
releasing the three latches (3) in figure 4-55. (Bezel will be reused.)
CAUTION: (1) Do not damage the Latch and TAB.
(3) Remove the bezel while releasing the latches
(1) Remove the
side Latch
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
(2) When removing the bezel, do not change its shape.
Figure 4-55 Replacing 14.1 Inch TMD fluorescent lamp (SXGA+) (3)
(2) Lift up the bottom bezel
4 Replacement Procedure
Bezel
(1) Remove the side Latch
4-83