Page 1
User’s Guide If you need assistance: ❖ Toshiba’s Support Website pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 182 in this guide.
Page 2
AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port and microphone jack.
Contact either: ❖ Toshiba’s Support Website at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777. Outside the United States at (949) 859-4273. Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à...
Page 10
Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
Page 15
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16
802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17
❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 18
802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or ❖...
Page 22
The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23
Taiwan Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications.
Page 24
This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25
Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27
ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wireless Capability Ethernet Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Other precautions ... 46 Important information on your computer’s Setting up your computer ... 49 Setting up your software... 49 Registering your computer with Toshiba ... 50 Adding external devices ... 51 Connecting the AC adapter... 51 Using the main battery... 54...
Page 29
Connecting other external devices ... 77 Using the TouchPad ... 77 Disabling or enabling the TouchPad... 78 Using the Toshiba Assist button... 79 Customizing your computer’s settings... 81 Powering off the computer ... 81 Closing the display panel ... 82 Different ways to turn the computer on and off ...
Page 30
Contents Chapter 2: Learning the Basics ... 85 Computing tips ... 85 Using the keyboard ... 87 Character keys ... 87 Making your keyboard emulate a full-size Ctrl, Fn and Alt keys ... 88 Function keys... 89 Windows Overlay keys... 90 Saving your work ...
Page 31
Going into Standby mode more quickly ... 112 Starting again from Standby ... 114 Chapter 3: Mobile Computing ... 115 Toshiba’s energy-saver design ... 115 Running the computer on battery power ... 115 Battery Notice ... 116 Power management ... 117 Using additional batteries ...
Page 32
Contents Back of the optional Advanced Port Using the optional Advanced Port Replicator III .. 134 Attaching the optional Advanced Port Connecting the optional external USB diskette drive ... 135 Using an external keyboard... 136 Connecting a keyboard ... 136 Using an external monitor...
Page 33
Using audio features ... 156 Using external speakers or headphones... 157 Recording sounds... 158 Using a microphone... 158 Chapter 6: Toshiba Utilities ... 160 Fn-esse Starting Fn-esse... 161 Assigning a key to a program or document ... 162 Viewing existing key assignments ... 164 Changing or removing existing key Hotkey utility ...
Page 34
Develop good computing habits ... 207 If you need further assistance... 208 Before you contact Toshiba... 208 Contacting Toshiba ... 209 Other Toshiba Internet Web sites ... 210 Toshiba’s worldwide offices ... 211 Appendix A: Hot Keys ... 213 System Setup... 179 passwords in the System Setup...
Page 35
Volume Mute... 213 Volume Control ... 213 Password security ... 214 Without a password ... 214 With a password ... 214 Maintaining security when the battery Power usage mode ... 216 Standby mode... 217 Hibernation mode ... 218 Display modes ... 219 Display brightness ...
Introduction Welcome to the world of powerful and portable multimedia computers! With your new Toshiba notebook computer, your access to information can accompany you wherever you go. ® ® You will find that the Microsoft Windows XP Professional operating system is already installed on your computer. It...
Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, and system/ component/options availability are all subject to change without notice.
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Your computer comes with the following documentation: ❖ An electronic version of the user’s guide. ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com. Introduction Other documentation...
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on contact your Toshiba service representative or your network administrator. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
Page 43
Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. ❖ Place the computer on a flat surface at a comfortable height and distance. You should be able to type without twisting your torso or neck, and look at the screen without slouching.
Page 44
Getting Started Selecting a place to work ❖ Position your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor. If you are using a conventional chair: ❖...
Arms and wrists ❖ Avoid bending, arching, or twisting your wrists. Keep them in a relaxed, neutral position while typing. ❖ Exercise your hands, wrists, and arms to improve circulation. Using the computer keyboard incorrectly may result in discomfort and possible injury. If your hands, wrists, and/or arms bother you while typing stop using the computer and rest.
Getting Started Selecting a place to work Other precautions Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel. You should observe certain precautions to further reduce the risk of personal injury or damage to the computer. ❖...
Page 47
Never allow any liquids to spill into any part of your PC, and never expose the PC to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Getting Started Selecting a place to work ❖ Scan all new files for viruses. This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus.
Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to “Setting up your software” on page 49 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards.
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Adding external devices NOTE Before adding external devices, Toshiba recommends setting up your software. See After starting your computer for the first time you may want ❖ Add more memory (see page 58). ❖ Connect a mouse (see page 73).
Page 52
Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 53
Connecting the AC adapter to the computer Connect the power cord/cable to a live electrical outlet. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. The AC power light on the indicator panel glows green.
Getting Started Using the main battery NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving input from the AC power supply. Disconnect the AC cable and remove the main battery pack. “Changing the main battery”...
Using the computer for the first time For information on connecting devices see computer” on page Opening the display panel Press the display panel latch and lift the display panel Opening the display panel To avoid damaging the display panel do not force it beyond the point where it moves easily.
Getting Started Using the computer for the first time NOTE Over a period of time, and depending on the usage of the computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.
Page 57
Using the computer for the first time Turning on the power Press and hold the power button in until the on/off light on the system indicator panel glows green--about one second. HINT: After turning on the computer for the first time, do not turn off the power again until the operating system has completely loaded.
Additional memory comes in various capacities (to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com). Installing a memory module One slot is available for adding a memory module.
Do not try to remove a memory module with the computer turned on. You may damage the computer, the module, or both. Do not remove the memory module while the computer is in Stand By mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 60
Getting Started Adding memory (optional) Base of the computer Loosen the screw that secures the memory slot cover, then remove the memory slot cover. Loosening the memory slot cover screw Place the cover in a safe place so that you can retrieve them later.
Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Page 62
Getting Started Removing a memory module Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in Standby mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Removing the memory module Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Seat the cover and secure it with the screw. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work.
The system will prompt you to insert the appropriate number NOTE of CDs or DVDs to copy the Hard Drive Recovery Utilities. If your optical disk drive is not writable, contact TOSHIBA Customer Support to obtain the Recovery media for your system.
Page 65
Sample Recovery Disc Creator screen Select the items you want to copy by clicking the checkbox next to the item’s Name – recovery files, applications (original bundled drivers and applications), or both the recovery files and applications. Click Burn. Insert the first CD or DVD into your computer’s CD/ DVD writable drive when prompted.
Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. Sample TOSHIBA HDD Recovery Utility screen...
Page 67
To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 68
Be sure to save your work first. To resize and recover your C: drive: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all information will be lost during the recovery process.
❖ Insert the first recovery CD or DVD into your CD/DVD drive and power on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image...
Page 70
To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 71
To recover your C: drive without the recovery partition: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all data will be lost during the recovery process.
Getting Started Hard Drive Recovery Utilities Deleting the Hard Disk Recovery Utility You can delete the HDD recovery partition without losing your data. Click Start, All Programs, Hard Disk Recovery Utilities, then Delete Hard Disk Recovery Partition. When the computer powers on, the Delete Hard Disk Recovery Utility warning screen displays.
Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: Double-click the Toshiba Application Installer icon on the Windows desktop. You can also launch the application by clicking Start, All Programs, then Hard Disk Recovery Utilities.
Getting Started Connecting a printer Connecting a printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 75
See your printer documentation for additional configuration steps, or see “Setting up a printer” on page Setting up a printer TECHNICAL NOTE: Some printers require a specific installation process. Refer to your printer installation guide for instructions. If you have a printer, follow these steps to set it up for the first time.
Getting Started Connecting the modem Connecting the modem Your computer comes with an integrated modem. Before you can communicate using the modem, you need to connect it to a standard voice-grade telephone line. Locate the modem port on the back of your computer. Plug one end of a telephone cable (purchased separately) into the modem port on the back of the computer.
The modem is designed for use with a standard analog telephone line. Never connect the modem to a digital telephone line. A digital line will damage the modem. For more information on using a modem, see communications” on page Connecting other external devices For more information on attaching the optional Advanced Port Replicator III, an external monitor and other external USB-compatible devices, such as a keyboard and diskette...
Getting Started Using the TouchPad ❖ To move it to the left side, slide your finger from right to left. NOTE Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction.
NOTE TouchPad (see Using the Toshiba Assist button The Toshiba Assist button, the left-hand button located to the left of the keyboard, activates the Toshiba Assist. This gives you quick access to some common functions. You can change the function of this button so that it performs other operations if you desire.
Page 80
Hardware. Select Toshiba Controls. This displays the Toshiba Controls Properties dialog box. Select the box under the TOSHIBA Assist button section to bring up the available options. There are six options available when assigning a function to the TOSHIBA Assist button: ❖...
Hibernate command to save your system settings to the hard disk so that, when you turn on the computer again, you automatically return to where you left off. Powering off the computer “Changing the main battery” on “Toshiba Utilities” on page Getting Started 160.
Hardware Setup” on page ❖ If you have an action feature set, the computer will perform that action (Nothing, Standby, Hibernate). For more information, see page 170. ® XP Professional “Powering off the computer” on “TOSHIBA 172.) “TOSHIBA Power Saver” on ®...
Different ways to turn the computer on and off Pressing the power button is not the only way to turn on and off the computer. Alternatives include: ❖ Using Hot Key combinations ❖ Opening and closing the display panel For more information, see “Using Standby”...
Getting Started Caring for your computer Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive-in-use light stops glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back (where the ports are located).
Chapter 2 Learning the Basics This chapter lists computing tips and provides important information about the system’s basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 86
Learning the Basics Computing tips ❖ Back up your files to disks (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Learning the Basics Using the keyboard Making your keyboard emulate a full-size keyboard Although your computer’s keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two editing keys; cursor positioning keys; and a numeric keypad. Pressing the of the specially marked keys allows you to emulate a full-size keyboard.
Function keys Function keys The function keys (not to be confused with the 12 keys at the top of the keyboard. They are called function keys because they run programmed functions determined by the application you are using. For more information, see your program documentation.
Learning the Basics Using the keyboard Overlay keys Keyboard overlay keys The keys with numbers and symbols on them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10- key keypad on a full-size keyboard.
To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out. Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. Always save your data even when you are using Stand by mode.
Learning the Basics Saving your work Sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft Word saves files with a .doc extension. Any file name with an extension of “.doc”...
Learning the Basics Connecting an optional external diskette drive Sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5-inch diskettes.
Backing up your work To back up several files at one time, use the Backup or Restore Wizard. You can choose the files and the type of backup you want to perform. Connect the backup device to your computer as shown in the manufacturer’s instructions.
Learning the Basics Restoring your work Restoring your work You can also use the Backup or Restore Wizard to restore information from your backup media to your hard disk. TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the hard disk.
Right-click, select File, then click Send To. Click the icon for the destination device. Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.
If you are using a DVD-ROM drive or multi-function drive, you can watch DVD movies using the InterVideo WinDVD™ application. Using Windows Explorer, browse to the C:\Toshiba\WinDVD folder and double-click the Setup.exe file. ® Player control panel works much like...
TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times.
Learning the Basics Playing DVDs Grasp the disc tray and pull it fully open. Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge.
Locate and press the eject button. The disc tray partially opens. Grasp the sides of the disc tray and pull it fully open. Remove the disc from the disc tray and place it in its protective cover. If the disc is spinning when you open the disc tray, wait for the disc to stop before removing it.
Learning the Basics Powering down the computer ❖ Hold a disc by its outside edge. Fingerprints on the surface can prevent the DVD-ROM drive or multi- function drive from reading the data properly. ❖ Do not expose discs to direct sunlight or extreme heat or cold.
❖ Standby, which saves the current operating state to memory and enters a low power mode ❖ Restart, which restarts the computer Each option has its advantages. TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off.
Learning the Basics Powering down the computer Hibernation command The Hibernation command powers off the computer, but it first saves the current state of the computer to the hard disk. Since Hibernation does not require power to maintain the saved information, the system settings are retained indefinitely.
❖ When starting up again, this choice uses less time and battery power than either Turn Off, Shut down or Hibernation. ❖ On restarting, the computer returns to the state in which you left it, and opens all the programs and files you were using.
To use this method, you first need to turn on the feature in TOSHIBA Power Saver. Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab. ® network server (domain...
Page 107
Set this option to Shutdown if you want the computer to turn off when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Learning the Basics Using Turn Off or Shut down...
Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab. Sample TOSHIBA Power Saver Properties window...
Set this option to Shutdown if you want the computer to turn off when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Going into Hibernation mode If you are not connected to a Windows...
Learning the Basics Using Hibernation The computer saves the state of the system, including all open programs and files, to the hard disk, and then powers down completely. If you are connected to a Windows server), follow these steps to power down the computer using Hibernation: Click Start, then Shut Down.
Using Standby If you are not connected to a Windows (domain server), power down the computer using the Standby command as follows: Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window with Stand By option Click Stand By.
Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click on the Setup Action tab.
Page 113
Sample Full Power Properties window Select Standby for the options you want. ❖ When I press the power button Set this option to Standby so that the computer will go into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby so that the computer will go into Standby mode when you close the display...
Learning the Basics Using Standby Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Standby Use these instructions to restart the computer when you enter Standby mode by closing the display panel: ❖...
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
This may shorten the life of the battery, and the battery light may not indicate a low-battery condition. For optimum DVD performance, Toshiba recommends that you NOTE play DVDs while running on AC power rather than on battery power.
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Mobile Computing Running the computer on battery power...
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet.
TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur. Your computer's Power Saver utility can be used to select a power level setting that reduces the power required for system operation and will allow the battery to recharge.
Page 120
Mobile Computing Charging batteries The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer.
Click Start, then click Control Panel. Click Performance and Maintenance. Click the Toshiba Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Toshiba’s power-saving options greatly increase the length of time you can use the computer before having to recharge the main battery. Toshiba has combined these options into several preset power usage modes. Mobile Computing Monitoring main battery power...
The Control Panel window appears. Click Performance and Maintenance. Click the TOSHIBA Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window By changing the options that appear in the Power Saver Properties dialog box and clicking OK, you can reconfigure that function.
Using a hot key to select the power usage mode Press pop-up window. While continuing to press desired power usage mode. Release the The computer is now in the selected mode. Changing the main battery When handling battery packs, do not drop or knock them. Also, be careful not to damage the casing or short-circuit the terminals.
Page 126
Mobile Computing Changing the main battery If the battery release lock is in the locked position, slide it toward the unlocked position. Sample battery release lock Slide the battery release latch to release the battery. Sample battery release latch...
Page 127
Pull the discharged battery out from the back of the computer. Sample removing the discharged battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries”...
Mobile Computing Taking care of your battery The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position.
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba.
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords/cables, and compact discs. Contact your authorized Toshiba representative for more information.
To order additional devices and accessories, see the accessories information provided with your computer, or visit accessories.toshiba.com. Using your computer at the office By connecting an external full-size keyboard, an external monitor, a mouse and a printer, you can work with your computer as if it were a standard office model.
For more information, see the accessories information package that comes with the device or visit accessories.toshiba.com Optional Advanced Port Replicator III The optional Advanced Port Replicator III enhances your mobility because it provides ports that enable you to connect to many expansion devices.
Expansion Options Using the optional Advanced Port Replicator III Use the Universal Serial Bus (USB) ports to connect the optional external USB diskette drive or other USB peripherals. You can connect the AC adapter to the DC-IN jack on the optional Advanced Port Replicator III.
Connecting the optional external USB diskette drive Connecting the optional external USB diskette drive The optional external USB diskette drive allows you to use diskettes and is useful for installing software on the hard disk, exchanging information with other systems, and making backup copies of the files stored on your hard disk.
Expansion Options Using an external keyboard Attaching the optional diskette drive cable to one of the computer’s USB ports. Using an external keyboard If you prefer to use a standard keyboard, you can attach one to a USB port on the computer or on the optional Advanced Port Replicator III, provided the keyboard is USB- compatible.
Page 137
replicator is connected to your computer, turn off the computer. NOTE Make sure the computer is off before you attach the monitor. Connecting a monitor with the computer’s power on may damage the monitor, the computer, or both. Connect the monitor’s video cable to the RGB (monitor) port on the computer or the optional Advanced Port Replicator III.
Multi-function drive. ❖ DVD Multi drive. HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit Toshiba’s Web site at accessories.toshiba.com key. “Connecting a printer”...
Removing a module from the Slim SelectBay Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables attached to your computer, or to the computer itself. Turn off the computer. You may also hot swap a module in the Slim SelectBay.
Expansion Options Using PC Cards Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay, slide the module all the way into the Slim SelectBay. Using PC Cards PC Cards are credit-card sized expansion cards that greatly increase the capabilities of your computer.
Inserting a PC Card Before inserting a PC Card, read the documentation that came with the card to see if it has any special requirements. HINT: The operating system provides the Card and Socket Services software for your PC Card. Even if your PC Card comes with its own version of Card and Socket Services, you should use the files included in the operating system.
Expansion Options Using PC Cards ❖ Never remove a network card while you are connected to the network. ❖ Never remove a SCSI card while any of the SCSI devices connected to it are operating. DEFINITION: SCSI is an acronym for Small Computer Systems Interface.
Grasp the edges of the PC Card and carefully slide it out of the slot. Using a Secure Digital (SD) card Your computer supports the use of an SD™ media card. Inserting an SD card Important: Do not use the Copy Disk function for SD cards. In order to copy data from one SD card to another, use the following procedure: Format the target SD card in the same format as the source SD...
Expansion Options Using a Secure Digital (SD) card Turn the card so that the contacts (metal areas) are face down. Push the card into the slot until it locks in place. Removing an SD card Click Start, then My Computer. Right-click the SD drive’s icon and select Eject from the pop-up menu.
Expansion Options Using the i.LINK® port ® Using the i.LINK port ® The i.LINK port on the rear of the computer provides an extremely fast data transfer rate. You can connect up to 63 ® external devices to the i.LINK port.
Chapter 5 Enhancing Productivity In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows several new features and enhancements, including: ❖ New system file protection ❖ A system restore function, allowing you to rollback the system to its previous mode ❖...
Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: ❖ Taskbar—which resources to display for quick access ❖...
Enhancing Productivity Personalizing your desktop Bringing the world to your desktop With the Windows desktop with complete World Wide Web integration at a single click. Adding components to the Web content interface Point to an empty space on the desktop and click the secondary button.
Changing desktop and browsing style The operating system enables you to customize the way you view your desktop and browse the files and folders on your local computer or network file server. You can specify that: ❖ Items that normally require a double-click will open with a single click.
Enhancing Productivity Personalizing your desktop Sample Folder Options dialog box Click the preferred options. Click Apply, then OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Customizing window toolbars You can display one or more customizable toolbars at the top of a window. As you browse, the operating system detects the kind of information presented in the window and automatically displays the appropriate toolbar buttons and menus.
Enhancing Productivity Personalizing your desktop Toolbar element Address Bar Links Displaying a toolbar in a window Open the Start menu and select My Computer. On the View menu, point to Toolbars, then click the name of the toolbar you want to display. The toolbar appears below the menu bar of the current window.
Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page. Setting up for communications In order to connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need:...
To verify that the modem is set up properly, double-click the COM port to which your modem is connected. The Toshiba Software Modem Properties box appears. In the device status area, the computer should indicate whether the modem is working properly.
Using the Ethernet LAN Port If your operating system is Windows can connect your computer to a Local Area Network (LAN) at work or from a remote location. When your computer starts, the Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server.
Enhancing Productivity Using audio features Setting up a direct cable connection NOTE To establish a direct cable connection you will need to purchase a Data Transfer/Direct Connect cable, which is sold separately. To establish a direct cable connection with another computer: Click Start, All Programs.
Using external speakers or headphones Instead of using the internal speaker, you can connect headphones or a pair of external stereo speakers Before using headphones to listen to an audio CD, turn the volume dial down. Playing the CD with the volume set too high could damage your ears.
Enhancing Productivity Using audio features Recording sounds An external microphone may be used with other software to record audio sounds and save them as digital audio .WAV files on disk. DEFINITION: A .WAV (pronounced “wave”) file is one of the formats for storing sound in files.
Page 159
Click the Record button and speak normally into the microphone. NOTE You can only record 60 seconds at a time. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. The microphone on your computer might be set to Mute.
These utilities are described in this chapter: ❖ Fn-esse® ❖ Hotkey utility ❖ Mobile Extension Service Configuration ❖ TOSHIBA Assist ❖ TOSHIBA Button Controls ❖ TOSHIBA Power Saver ❖ TOSHIBA Hardware Setup ❖ TOSHIBA Zooming Utility...
® Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files.
Toshiba Utilities Fn-esse® The keys are color-coded as follows: ❖ Available keys are white. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys do not appear.
Page 163
To make a popup assignment, select Popup to display the Application Explorer dialog box, then complete these steps: ❖ Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs Toshiba Utilities Fn-esse® key, then...
Toshiba Utilities Fn-esse® and documents in the folder. These are the items that appear in the popup list. ❖ To create a popup list with items from various folders, or to pick only a few items from a folder, create a new folder containing only the desired programs and documents.
The hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba Utilities, and then click Hotkey utility. The Hotkey window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Toshiba Utilities Mobile Extension Service Configuration Mobile Extension Service Configuration To adjust the settings for the optional Advanced Port Replicator III, use the TOSHIBA Mobile Extension Service Configuration utility. To use the TOSHIBA Mobile Extension Service Configuration: Click Start, then Control Panel, then Performance and Maintenance.
Sample Display Change Service tab options For more information about expansion devices, see expansion device” on page TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist window The TOSHIBA Assist offers four categories of features: ❖ Connect ❖ Secure ❖ Protect & Fix ❖ Optimize Customizing Your Computer The features available in this category are: ❖ Power Management ❖...
❖ User password TOSHIBA Button Controls The TOSHIBA Button Controls allow you to enable or disable the Toshiba Assist and Internet buttons and the programs associated with them. Those buttons are located just above the function keys at the top of the keyboard.
Toshiba Utilities TOSHIBA Power Saver Sample TOSHIBA Controls Properties window Check the boxes for the Toshiba Assist button and/or the Internet button. Click the selected button. Under Select a Program, make the desired selections. Click Apply, then click OK. TOSHIBA Power Saver The TOSHIBA Power Saver utility enhances your computer’s...
Page 171
Sample TOSHIBA Power Saver Properties window You may also access the Power Saver Properties by pressing the TOSHIBA Assist button: Press the TOSHIBA Assist above the left side of the keyboard. The TOSHIBA Assist screen appears. Click Optimize and click the Power Management icon.
To access it: In the Toshiba Assist, double-click the Toshiba Hardware icon. Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: Choose the desired tab and accompanying options. ❖ Display—Allows you to change various default settings...
Page 173
General—Allows you to view current BIOS version or to change certain settings back to their default values. ❖ Device Config—Shows the Device configuration options. ❖ Parallel/Printer—Allows you to configure the parallel port default settings. ❖ Keyboard—lets you enable or disable wake-on-keyboard. Toshiba Utilities TOSHIBA Hardware Setup...
Microsoft Explorer, Microsoft ® Adobe Reader. To access the utility, click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Zooming Utility. The TOSHIBA Zooming Utility screen appears. Sample TOSHIBA Zooming Utility screen ®...
If this happens and you want to establish a master password for your hard disk, contact your network administrator for instructions. Toshiba Utilities Hard disk drive passwords...
YOU WILL NEVER BE ABLE TO ACCESS YOUR HARD DISK AGAIN, unless you’ve set a hard disk drive master password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
. If the two passwords do not match, an error to save the change. key and press and hold the power to move to the HDD PASSWORD section on the Enter . If the two passwords do not match, an error Toshiba Utilities...
Toshiba Utilities Hard disk drive passwords message appears. Repeat steps 5 and 6 to enter the password again. If you want to delete the user password, leave the space blank and press Registered Press When System Setup prompts you to confirm your...
. You may use any combination Enter Enter for both User and Master passwords. If the two to save the change. key and press and hold the power to move to the HDD PASSWORD section on the Enter Toshiba Utilities...
Toshiba Utilities Hard disk drive passwords If you want to change your password, input the new password. When System Setup prompts you to verify the password, type it again and press If the two passwords match, System Setup displays: Registered user password if a master password is registered.
Page 181
System Setup displays: will also display as Press to save the change. When System Setup prompts you to confirm your change, Press Toshiba Utilities Hard disk drive passwords twice. Enter . The user password Not Registered Not Registered.
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 183
Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
If Something Goes Wrong Problems when you turn on the computer Add a paragraph break and type some notes describing what you were doing when you received the message, and how the error can be reproduced. Save the file and refer to it when you contact the software manufacturer.
Page 185
Problems when you turn on the computer documentation that came with the conflicting device and “Resolving a hardware conflict” on page The computer is not accessing the hard disk or the external diskette drive. Your computer normally loads the operating system from the hard disk.
If Something Goes Wrong The Windows key does not work, press computer. For more information, see hard disk or the external diskette drive.” on page The Windows working Once you are familiar with the desktop and used to the way the operating system responds to your work routine, you can easily detect if the operating system is not working correctly.
Page 187
® The Windows ® The Windows options: ❖ Safe Mode ❖ Safe Mode (with Networking) ❖ Safe Mode (with Command Prompt) ❖ Enable Boot Logging ❖ Enable VGA Mode ❖ Last known good configuration (your most recent settings that worked) ❖...
If Something Goes Wrong The Windows Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow), and popularity of the site.
You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
Page 192
If Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.
Click Troubleshoot... A Help and Support window for that device appears. For more information about Device Manager, refer to Windows Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer.
If Something Goes Wrong Resolving a hardware conflict Power and the batteries Your computer receives its power through the AC adapter and power cord/cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cord/ cable will neither power the computer nor recharge the batteries.
Toshiba Web site at accessories.toshiba.com. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
If Something Goes Wrong Resolving a hardware conflict You have connected an external keyboard and the operating system displays one or more keyboard error messages. If you have a second keyboard, try it. If it works, the first keyboard may be defective or incompatible with your computer.
Page 197
The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box. The Appearance tab of this dialog box allows you to choose the colors for the screen.
If Something Goes Wrong Resolving a hardware conflict The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Error-checking Run Error-checking, which analyzes the directories, files, and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check and select Properties from the menu.
Page 200
If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer.
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly, but others do not. If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs. Sound system problems You do not hear any sound from the computer.
Page 203
CIS contains enough information for you to use the card immediately. Other cards must be set up before you can use them. Use the ® Windows XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft information, or refer to the documentation that came with the PC Card.
Page 204
If Something Goes Wrong Resolving a hardware conflict Click My Computer icon with the secondary button, then click Properties. The System Properties dialog box appears. Click the Hardware tab. Click the Device Manager button. Double-click the PCMCIA adapter. Double-click the appropriate PC Card. The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status.
Removing a malfunctioning card and reinstalling it can correct many problems. A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
If Something Goes Wrong Resolving a hardware conflict If you cannot resolve the problem, contact the printer’s manufacturer. The printer will not print what you see on the screen. Many programs display information on the screen differently from the way they print it. See if your program has a print preview mode.
Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. by selecting your particular product and...
Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. Toshiba’s Technical Support Website For technical support, or to stay current on the most recent software and hardware options for your computer, and for...
If Something Goes Wrong Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Worldwide Toshiba corporate site Marketing and product information in the USA Canada Europe Japan Mexico and all of Latin America...
Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Page 212
Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road...
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, “TOSHIBA Power Saver” on page...
Standby mode This hot key puts the computer into Standby mode. Sample Standby confirmation box Standby mode ❖ A message box is displayed by default to confirm that the computer is going into Standby mode. You can choose not to display this message box. ❖...
Hot Keys Hibernation mode Hibernation mode This hot key puts the computer into Hibernation mode. Sample Hibernation confirmation box ❖ If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. You can choose not to display this message box.
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
This hot key turns the Zooming utility to zoom-in. For more information, see on page This hot key turns the Zooming utility to zoom-out. For more information, see Utility” on page “Disabling or enabling the “TOSHIBA Zooming Utility” 174. “TOSHIBA Zooming 174.
Keyboard hot keys This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) This hot key turns the cursor control overlay on and off.
Appendix B Power Cord/Cable Connectors Your computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 223
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Assist button (if applicable to your system) to open the Toshiba Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 226
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key...
Using ConfigFree™ with your Toshiba Computer If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.
Page 228
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To search for wireless devices: Click the Click Search for Wireless Devices. A virtual map appears with a graphical representation of the wireless devices that have been detected. Search for Wireless Devices can also be started from the NOTE ConfigFree Launcher.
Page 229
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Click the icon of a Bluetooth device. Click your own computer at the center of the map. Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device.
Page 231
Using ConfigFree™ with your Toshiba Computer ❖ Printer settings for the default printer. To create a profile: Click the icon in the system tray. Move the pointer to Profile. Click Add. The Add Profile screen appears. Select Capture and click OK. The Add Profile screen appears.
To connect to a Toshiba Wireless Projector: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the icon in the system tray.
Page 233
LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later. To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings.
Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Using ConfigFree™ with your Toshiba Computer Click OK. If your computer is connected to multiple wireless LAN NOTE devices, the Auto Switch (SSID) feature is disabled. To enable this feature, only one wireless LAN device can be used. Semi-Automatic Switch Feature...
Page 236
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature The computer is now configured to use the Semi-Automatic Switch feature. When the computer connects to an SSID in a profile, a display notification window appears. You can then click Switch on the window to switch profiles. You can also set the option for having the switch be automatic without the need for a notification.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewritable memory...
Page 238
Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 239
SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 240
Glossary alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
Page 241
bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
Page 242
Glossary compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as each other. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
Page 243
disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk —...
Page 244
Glossary DVD — An individual digital versatile (or video) disc. See also DVD- ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM.
Page 245
— The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 246
Glossary hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. icon — A small image displayed on the screen that represents a function, file, or program.
Page 247
local area network — See LAN. logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives.
Page 248
Glossary non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk — A disk for storing programs and data that cannot be used to start the computer.
Page 249
pointing device — Any device, such as the TouchPad or a mouse, that enables you to move the cursor on the screen. port — A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor —...
Page 250
Glossary ROM (read-only memory) — Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
Page 251
universal serial bus (USB) — USB is a serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all- purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.
Index Numerics 101-key keyboard 88 AC adapter 51 AC power connecting adapter 52 power light 57 accessories devices 138 docking solutions 133 PORT-Noteworthy computer lock cable 84 adding memory 58 audio .WAV digital wave files 158 features 156 playing 97 Backup or Restore Wizard 95 battery changing 125...
Page 253
Index problem solving 202 channels DMA 190 IRQ 190 checking device properties 192 cleaning the computer 83 click 78 COM port 154 command Turn Off 103 communications network connection 155 system resources 190 compact discs inserting 100 problem solving 202 removing 100 computer customizing 168...
Page 254
inserting discs 100 DVD-ROM or multifunction drive inserting a disc 99 removing 101 DVD-ROM/multi-function drive drive tray will not open 201 problems 201 troubleshooting 192 environment computer-friendly 41 ergonomics 42 error messages device driver conflict 189 general hardware problem 189 non-system disk or disk error problem with display settings/ current settings not working...
Page 255
Index methods 110 hot key display brightness 219 display modes 219 Hibernation mode 218 instant password security 214 keyboard 220 keyboard overlays 221 password security 214 power usage mode 216 Stand By mode 217 Standby mode 217 volume control 213 volume mute 213 hot keys 214 power usage modes 125...
Page 256
200 cannot read a diskette 200 changing display properties 197 checking device properties 192 compact discs not running computer will not power up 184 contacting Toshiba 208 corrupted/damaged data files 200 Index multi-function drive 201 correctly 202...
Page 257
Index Device Manager 191 disabling a device 191 disk drive is slow 199 display is blank 196 DVD-ROM/multi-function drive tray does not eject 201 external display not working 198 external keyboard not working external monitor 196 faulty memory 193 hardware conflict 189 high-pitched noise 202 illegal operation 183 Internet bookmarked site not...
Page 258
152 Toshiba registering computer 50 worldwide offices 211 Toshiba Accessories information 39 TOSHIBA Button Controls 169 TOSHIBA Console 167 Toshiba Hardware Setup 172 TouchPad using 77 traveling tips 131 Turn Off Turn Off command 103...
Page 259
Index Help 188 Help and Support 188 problem solving 186 special features 146 wireless interoperability 7 wireless networking 155 wizards Add Printer 75 Backup or Restore 95...
Need help?
Do you have a question about the S100-S1133 and is the answer not in the manual?
Questions and answers