4 Replacement Procedures
4.12 Touch pad
Removing the Touch pad
To remove the touch pad, follow the steps below and refer to Figure 4-16 and 4-17.
1. Disconnect the touch pad cable from the connector CN3201 on the system board.
2. Remove the following screw and the touch pad.
• M2×3B
4-30
Downloaded from LpManual.com Manuals
FLAT HEAD screw
Touch pad cable
CN3201
Figure 4-16 Removing the touch pad
×1
M2×3B FLAT HEAD
Touch pad
PORTEGE S100 Maintenance Manual (960-508)
4.12 Touch pad