Memory Module - Toshiba PORTEGE S100 Maintenance Manual

4 Replacement Procedures
4 Replacement Procedures

4.11 Memory module

Removing the Memory module
To remove the memory module, make sure the computer is in boot mode and powered off,
follow the steps below and refer to Figure 4-14 and 4-15.
CAUTION: The power must be turned off when you remove/insert the memory module.
1. Remove the following screws and the keyboard support plate.
• M2×8B
M2×8B BIND
4-28
Downloaded from LpManual.com Manuals
Inserting a memory module with the power on might damage the module or
the computer itself.
Never press hard or bend the memory module.
BIND screw
Figure 4-14 Removing the keyboard support plate
4.11 Memory module
×3
M2×8B BIND
Keyboard support plate
PORTEGE S100 Maintenance Manual (960-508)