Toshiba PORTEGE S100 Maintenance Manual page 111

3 Tests and Diagnostics
3.3.3.2 RAID : not OPTIMAL
ABSENT or OFFLINE is displayed
When the "ABSENT" or "OFFLINE" is displayed as shown below, the drive is
removed by the RAID console and installed again. When the drive is unlocked,
"ABSENT" is displayed. When the drive is locked, "OFFLINE" is displayed. Repair
is not needed in this case.
TOSHIBA RAID / RAID Information Display
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
LD0 RAID-1
Port
< RAID : not OPTIMAL >
3-14
Downloaded from LpManual.com Manuals
Level Status
DEGRADE xxGB
Write cache
Degrade Bootup
MBR Protection
S.M.A.R.T
Assgn Status
0 LD0-0 ONLINE
1 LD0-1 ABSENT
3.3 Check of the RAID configuration
Capacity
: Enable
: Yes
: Disable
: Enable
Size Model
xxGB FUJITSU----------
xxGB FUJITSU----------
PORTEGE S100 Maintenance Manual (960-508)
Rev xx.xx.xxxx
Rev
xxxxxxx
xxxxxxx