Toshiba PORTEGE S100 Maintenance Manual page 275

4.24 RTC battery/LAN jack
Removing the RTC battery/LAN jack
To remove the RTC battery/LAN jack, follow the steps below and refer to Figure 4-35.
1. Remove the RTC battery from the plastic holder.
2. Remove the LAN jack from the slot.
3. Remove the LAN jack cable from the cable guide.
Installing the RTC battery/LAN jack
To install the RTC battery/LAN jack, follow the steps below and refer to Figure 4-35.
1. Install the LAN jack to the slot and pass the LAN jack cable through the cable guide.
2. Pass the RTC battery cable through the hole of the plastic holder and place the RTC
battery on the holder.
3. Cover the LAN jack cable and RTC battery by the plastic holder.
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
LAN jack
Cable guide
Figure 4-35 Removing the RTC battery/LAN jack
4 Replacement Procedures
RTC battery
Plastic holder
4-57