Speaker - Toshiba PORTEGE S100 Maintenance Manual

4.15 Speaker

4.15 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-20.
1. Remove the following screws and the both side speaker holders.
• M2×4B
2. Remove the speakers (left and right) from the slots.
3. Turn up the insulator and disconnect the speaker cable from the connector PJ6170
on the system board.
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
FLAT HEAD screw
M2×4B FLAT HEAD
Speaker holder
Speaker
Insulator
Figure 4-20 Removing the speaker
4 Replacement Procedures
×2
M2×4B FLAT HEAD
Speaker holder
Speaker
Speaker cable
PJ6170
4-37