Toshiba PORTEGE S100 Maintenance Manual page 233

4.6 Modem Daughter Card (MDC)
Installing the Modem Daughter Card
To install the modem daughter card, follow the steps below and refer to Figure 4-5.
1. Connect the modem cable to the connector on the modem daughter card.
2. Seat the modem daughter card and press carefully on the card to connect it to the
connector CN3000 on the system board. Be careful not to damage the card or
connector.
3. Secure the modem daughter card with the following screws.
• M2×4B
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
×2
BIND screw
4 Replacement Procedures
4-15