Toshiba PORTEGE S100 Maintenance Manual page 239

4.9 HDD
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
3. Place the HDD pack on a flat surface, and remove the following screws.
• M3×4S
4. Separate the HDD from the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4S FLAT HEAD
PORTEGE S100 Maintenance Manual (960-508)
Downloaded from LpManual.com Manuals
disassemble if the HDD is working properly.
FLAT HEAD screw
HDD
Figure 4-9 Separating the HDD
4 Replacement Procedures
×4
M3×4S FLAT HEAD
HDD bracket
4-21