Phone Customization; Rings And Message Indicator Customization; Change Ring Tone; Change Ring Pattern (Flash-Only, Ring Once, Beep-Only) - Cisco 7906G User Manual

Phone Customization

•
•

Rings and Message Indicator Customization

You can customize how your phone indicates an incoming call and a new voice message. You can also adjust
the ringer volume for your phone.
Related Topics
User Options Web Pages, on page 69
User Settings on Web, on page 77

Change Ring Tone

Procedure
Step 1
Press
Step 2 Select a ring tone and press Play to hear a sample.
Step 3 Press Save to set the ring tone, or press Cancel.

Change Ring Pattern (Flash-Only, Ring Once, Beep-Only)

Before you can access this setting, your system administrator might need to enable it for you.
Rings and Message Indicator Customization, page 51
Phone Screen Customization, page 52
and select Settings > User Preferences > Rings.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
5
C H A P T E R
SIP)
51