Group Listen Feature; Monitor Feature - Cisco 7906G User Manual

Group Listen Feature

• Monitor (default)
Group Listen Feature
The following table shows how you can use the Group Listen feature.
If you want to...
Use the handset
Talk using the handset and listen on
the speaker at the same time (Group
Listen)
Turn off Group Listen and use the
handset
Hang up after using Group Listen
Adjust the volume level for a call

Monitor Feature

The following table shows how you can use the Monitor feature.
If you want to...
Use the handset
Listen to the call on the speaker
Turn off the speaker and use the
handset
Turn off the speaker and hang up
Adjust the speaker volume level for
a call
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
48
Then...
Lift it to go off-hook; replace it to go on-hook.
Press GListen.
Group Listen must be enabled by your system administrator
Note
for the GListen softkey to display.
Press GLOff.
Press EndCall or hang up.
When using Group Listen, adjusting the volume only changes
Note
the volume for the speaker and not the handset.
Press the up or down Volume button during a call or after invoking
a dial tone.
Press Save to preserve the volume level for future calls.
Then...
Lift it to go off-hook; replace it to go on-hook.
Press Monitor and then hang up the handset. You will be able to hear
the call but you will not be able to talk on the call.
The Monitor and MonOff softkeys are not available if Group
Note
Listen is enabled.
Lift the handset, or press MonOff.
The Monitor and MonOff softkeys are not available if Group
Note
Listen is enabled.
Press EndCall.
Press the up or down Volume button during a call or after invoking
a dial tone.
Press Save to preserve the volume level for future calls.
Handset, Headset, and Speaker