Place Call; Dial On-Hook (With Dial Tone); Redial Number - Cisco 7906G User Manual

Place Call

Tips
• You can dial on-hook without a dial tone (predial). To predial, enter a number, then go off-hook by
• When you pre-dial, your phone tries to anticipate the number you are dialing by displaying matching
• If you make a mistake while dialing, press << to erase digits.
• If parties on a call hear a beep tone, the call might be monitored or recorded. Contact your system
• You can start or stop a recording by pressing the Record softkey on your phone.
• Your phone might be set up for international call logging, which is indicated by a "+" symbol on the call
Related Topics
Hold and Resume, on page 20
Call Logs, on page 55
Place Call
Procedure
Pick up the handset and dial the number.

Dial On-hook (With Dial Tone)

Procedure
Press New Call and dial the number.

Redial Number

Procedure
Press Redial.
Cisco Unified IP Phones 7906G and 7911G User Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
14
lifting the handset and press Dial.
numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a number displayed
with Auto Dial, scroll to it, press Dial, and go off-hook.
administrator for more information.
logs, redial, or call directory entries. See your system administrator for more information.
Calling Features