Part No. 920525 Rev A - Wayne 3/VISTA series Service Manual

45 Reserved
46 Vapor Recovery Motor Turning
Wrong Direction
47 Illegal Sensor States from Vapor
Recovery Sys
48 Vapor Recovery Motor Load
High
49 Vapor Recovery Motor Load
Low
50 Jitter Limit Reached on an In
Transaction Pulser
51 Jitter Limit Reached on an Idle
Pulser
52 Jitter Limit Reached on an
Illegal Pulser
53 Reserved
54 Reserved
55 Reverse Flow Limit Reached on
an Illegal Pulser
56 Forward Flow Limit Reached on
an Idle Pulser
57 Forward Flow Limit Reached on
an Illegal Pulser
58 Communications Lost to an In
Transaction Pulser
59 Communications Lost to an Idle
Pulser
60 Reserved
61 Reserved
62 Pulser is Outputting Jitter
63 Reserved
64 Reserved
65 Reserved
66 Reserved
66

Part No. 920525 Rev A

Defective Wayne Vac Motor or
cables
Defective Wayne Vac control board
Defective Wayne Vac Motor or
cables
Defective Wayne Vac control board
Defective Wayne Vac Motor
Blocked vapor path
Defective Wayne Vac Motor
Defective Pulser
Defective Pulser
Defective Pulser
Defective check valve
Defective flow control valve
Defective computer
Defective Pulser
Defective ISB or cables
Defective Pulser
Defective ISB or cables
Volume of fuel dispensed during a
meter calibration exceeded limits.
Defective Pulser
Replace
Replace
Replace
Replace
Replace Wayne Vac Motor
Check vapor return path
(nozzle, hose, breakaway)
Check for vein adjustments
and debris.
Replace Motor
Replace
Replace
Replace
Replace
Replace
Re-Flash Program & Template
or Replace computer base
Replace
Replace
Replace
Replace
----
Replace Pulser
June 2001