Part No. 920525 Rev A - Wayne 3/VISTA series Service Manual

Blending and non-blending dispensers

Hide thumbs

Table Of Contents

Table of Contents

1 = Calculate the closest volume from the money and the unit price but show the preset money amount at the

end of sale as long as the sale hasn't reached the maximum overrun volume.

2 = Calculate a volume amount that will ensure a money amount that is greater than or equal to the preset

amount and show the preset money amount at the end of the sale as long as the sale hasn't reach the

maximum overrun volume.

F23 - Miscellaneous Timers

Sub-function numbers are in the format .0X where X = the selected configuration parameters defined as follows:

.00

Display test time (total test time - also known as valve on delay), 2-24 (units of 1/2 Sec)

.01

Minimum time between fillings, 0-20 (units of 1/2 Sec), where 0 = disabled

.02

Stop for offline error, 0-30 (seconds), where 0 = disabled

.03

Maximum time allowed for filling, 0-60 (minutes), where 0 = disabled

.04

Time from unit price change until next start of sale, 0-15 (seconds)

F24 - Local Preset Configuration

Sub-function numbers are in the format .0X where X = the selected configuration parameters defined as follows:

.00

Operation Mode

1 = Money amount only entry

2 = Volume amount only entry

3 = Default to money, toggle by button

4 = Default to volume, toggle by button

.01

Preset entry required before filling start

1 = Yes

2 = No

.02

FILL mode display

1 = Show dashes during filling

2 = Show 'FILL' during filling

.03

Preset entry time-out, 0-60 (units of seconds)

.04

Soft key #1 function configuration, 0-9

0 = Disabled

1 = Select Money Pre-set

2 = Select Volume Pre-set

3 = Toggle between Money or Volume Pre-set

4 = Select FILL Mode

5 = Select Pre-set Value #1

6 = Select Pre-set Value #2

7 = Select Pre-set Value #3

8 = Clear Key

9 = Enter Key

.05

Soft key #2 function configuration, 0-9 (See .04 for definitions of configuration items.)

.06

Soft key #3 function configuration, 0-9 (See .04 for definitions of configuration items.)

.07

Soft key #4 function configuration,.0-9 (See .04 for definitions of configuration items.)

.08

First digit entry point for money preset, 1-6

.09

First digit entry point for volume preset, 1-6