Part No. 920525 Rev A - Wayne 3/VISTA series Service Manual

Saving the New FPID
1. Press ENTER. The price display will show "– – – – – –", the volume display will be blank and the unit price display
will show the last sub-function accessed.
2. Press 00 (to access F00)
3. Press ENTER. The unit price should now display F00, the price display will show "– – – – – –"and the volume display
will be blank.
4. Press ENTER and the volume display will show a 1.
5. Press UP twice to change the value in the volume display from 1 to 3.
6. Press ENTER
7. The volume display should show a 3.
8. Press ENTER. CHANGE STORED should appear on the display momentarily. The display should return to normal in
a few seconds. When it does, the unit price displays should show the new prices. If they do not show the desired unit
prices, access the appropriate sub-function to make sure that the unit price data is correct.
8. Repeat the procedure for Side 2.
2.6 AUTHORIZING THE DISPENSER
The dispenser must be authorized before it will dispense product.
In stand-alone operation, not connected to a control system, the dispenser is always authorized, unless the dispenser is
equipped with the (optional) Authorize keyswitch on the bezel. This momentary contact keyswitch can be used for one
time authorizations.
When connected to a control system, the system programming determines authorization.
8

Part No. 920525 Rev A

June 2001