Verifying The Site Provides For Recommended Air Flow Clearances; Figure 3.2 - Recommended Air Flow Clearances - Reliance electric GV3000/SE Installation Manual

30 - 100 hp, 230v ac

Hide thumbs Also See for GV3000/SE:

Table of Contents

3.1.3 Verifying the Site Provides for Recommended Air Flow Clearances

150 mm

(6 in.)

3-4

Be sure there is adequate clearance for air ventilation around the drive. For best air

movement, do not mount GV3000/SE drives directly above each other. Note that no

devices are to be mounted behind the drive. This area must be kept clear of all

control and power wiring. Refer to figure 3.2 for recommended air flow clearances.

150 mm (6 in.)

When installing a GV3000/SE drive, prepare an opening for its ventilating duct at

the top of the cabinet and, if necessary, provide an extension of the duct to connect

between the opening and the duct.

150 mm

(6 in.)

1> IF ADJACENT TO OTHER DRIVES,

THIS CLEARANCE MUST BE

250 MM (10 IN.).

GV3000/SE 230 VAC 30-100 HP Drive, Hardware Reference Version 6.04

Table of Contents