Reliance electric GV3000/SE Installation Manual page 61

Terminal
Number
Isolated Reference Voltage
12
(+10 VDC)
Analog Speed/Torque
13
Reference Input Voltage
(+/– 10 VDC)
Analog Speed/Torque
14
Reference Input Current
(0-20 mA)
Isolated Speed/Torque
15
Reference Common
(Voltage/Current)
Wiring the Regulator Board Terminal Strip
Table 7.8 – Wiring Signal and Control I/O to the Terminal Strip (Continued)
Description
Wiring Analog Speed Reference Inputs
Related parameters:
P.000: Control Source
P.009: Terminal Strip Analog Input Offset
P.010: Terminal Strip Analog Input Gain
P.011: Terminal Strip Analog Input Configure
Refer to the GV3000/SE Software Start-Up and Reference manual
for additional parameter information.
Jumper J4 must also be set. See figure 2.6.
Parameters/Wiring Connections
+10 V 0 V
12 13 14 15
5K
+10 VDC
INPUT
SPEED REFERENCE
+20 mA 0 V
12 13 14 15
+ –
+20 mA
7-11