Assumptions About The Audience; Understanding Terms Used In This Manual; If You Want To Know More; Getting Assistance From Reliance Electric - Reliance electric GV3000/SE Installation Manual

1.2 Assumptions About the Audience

1.3 Understanding Terms Used in this Manual

1.4 If You Want to Know More

1.5 Getting Assistance from Reliance Electric

1-2
Describes the equipment that is needed to troubleshoot the drive
and how to measure DC bus voltage. A replacement part list is
also provided.
• Appendix A - Technical Specifications
Lists drive specifications in table form.
• Appendix B - 30-100 HP GV3000/SE System Wiring Diagram
Provides additional wiring information for the 30-100 HP drives.
This manual is intended for qualified electrical personnel. It is task-oriented and is
organized according to a logical progression of steps to be followed to install and
troubleshoot the drive.
The following terms are defined according to the way they are used in this manual:
• GV3000/SE drives will typically be referenced by horsepower. If additional
clarity is required, drive model numbers will also be included.
• Parameters will be referenced either as parameter (P.030) or Elapsed Time
Meter Reset (P.030).
Refer to the following related publications as necessary for more information:
• GV3000/SE 230 VAC General Purpose (Volts/Hertz) and Vector Duty Drive
Software Start-up and Reference manual (D2-3416-1).
• Instruction manuals listed in Table 2.3.
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance,
call 1-800-726-8112.
GV3000/SE 230 VAC 30-100 HP Drive, Hardware Reference Version 6.04