Bosch D7212GV3 Program Entry Manual page 15

D7212GV3 | Program Entry Guide | 2.0
3. To change the configuration, press [ENT] when
the current configuration shows, and then press
[NEXT] or [PREV] to scroll through the options,
as listed in R# Primary Device on page 14.
4. When the keypad reads the desired configuration
option, press [ENT] to select it.
5. When the keypad reads PARAMETER SAVED,
your selection has been configured.
D1260
1. Refer to Figure 2 on page 7 to access Keypad
Programming and navigate to the
Route Group 1 - 4 option.
2. At the Route Group 1 - 4 prompt, enter the route
group number you wish to configure and press
[ENTER]. The keypad reads Rt Group 1
Primary, and then the current configuration (for
example, SDI 88 PATH 4).
3. To change the configuration, press the Edit
softkey, and then press the Next or the Previous
softkey to scroll through the options, as listed in
R# Primary Device on page 14.
4. When the keypad reads the desired configuration
option, press the Save softkey to select it.
When the keypad reads Parameter Saved, your
selection has been configured.
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Panel and Area Wide Parameters
R# Backup Device
Default:
Selection:
No Device
Phone 1
Phone 2
Phone 3
Phone 4
SDI 88 Path 1
SDI 88 Path 2
SDI 88 Path 3
SDI 88 Path 4
SDI 92 Path 1
SDI 92 Path 2
SDI 92 Path 3
SDI 92 Path 4
Select the communication device and the backup
destination. The backup device is used when the
primary device fails to reach the programmed
destination
No Device
No Device, Phone 1..4, SDI ##
Path 1..4
This route group is disabled.
Phone 1 or SDI Path 1 is this
group's backup destination if the
primary destination fails.
Phone 2 or SDI Path 2 is this
group's backup destination if the
primary destination fails.
Phone 3 or SDI Path 3 is this
group's backup destination if the
primary destination fails.
Phone 4 or SDI Path 4 is this
group's backup destination if the
primary destination fails.
Path 1 on SDI 88 is this group's
backup destination if the primary
destination fails.
Path 2 on SDI 88 is this group's
backup destination if the primary
destination fails.
Path 3 on SDI 88 is this group's
backup destination if the primary
destination fails.
Path 4 on SDI 88 is this group's
backup destination if the primary
destination fails.
Path 1 on SDI 92 is this group's
backup destination if the primary
destination fails.
Path 2 on SDI 92 is this group's
backup destination if the primary
destination fails.
Path 3 on SDI 92 is this group's
backup destination if the primary
destination fails.
Path 4 on SDI 92 is this group's
backup destination if the primary
destination fails.
EN | 15