Fuses - Mercury 200 Verado FourStroke Operation And Maintenance Manual

7. Saltwater use ‑ Apply Anti‑Seize Compound only onto the threads of the
spark plugs.
Tube Ref
Description
No.
Anti-Seize
81
Compound
8. Before installing spark plugs, clean off any dirt on the spark plug seats.
Install the plugs finger‑tight and then tighten an additional 1/4 turn or
tighten to the specified torque.
Description
Spark plug
9. Push pencil coils into place over the spark plugs using a twisting motion.
10. Secure coil with the screw. Tighten the screw to the specified torque.
Description
Screw
11. Connect the wire harness to the pencil coil.
a
a - Wiring harness connector
b - Pencil coil
c - Screw
12. Install the rear and top cowls.

Fuses

IMPORTANT: An ATC fuse has the fuse element enclosed or sealed inside the
plastic housing. This type of fuse must be used for marine applications. Marine
applications are exposed to environments that may have the potential to
accumulate explosive vapors. ATO fuses have exposed elements and should
never be used in marine applications.
eng
MAINTENANCE
Where Used
Spark plug threads
85
Nm lb‑in.
27 –
Nm lb‑in.
8 71
b
c
57247
Part No.
92-898101385
lb‑ft
20
lb‑ft
–