Mercury 200 Verado FourStroke Operation And Maintenance Manual page 96

The electrical wiring circuits on the outboard are protected from overload with
fuses. If a fuse is blown, try to locate and correct the cause of the overload. If
the cause is not found, the fuse may blow again.
Remove the fuse puller from the holder.
Remove the cover from the fuse holder. Remove the suspected blown fuse and
look at the silver band inside the fuse. If band is broken, replace the fuse.
Replace the fuse with a new fuse with the same amp rating.
c
d
a - Fuse puller
b - Fuse holder
c - Good fuse
d - Blown fuse
e - Electronic control module ‑ 20 amp
f - Ignition coils ‑ 20 amp
g - Fuel pumps ‑ 20 amp
h - Spare fuses (3)
i - Thrust vector module ‑ 20 amp (Joystick Piloting models only)
j - Diagnostics terminal ‑ 2 amp
k - Fuel injectors ‑ 20 amp
MAINTENANCE
a
e
f
g
20 20 20
20 20 20
20 2 20
i
k
j
b
h
86
57250
eng