Mercury 200 Verado FourStroke Operation And Maintenance Manual page 38

4. Throttle only button ‑ Allows the boat operator to increase engine RPM for
warm‑up, without shifting the engine into gear. To engage throttle only,
move the control handle into the neutral position. Press the throttle only
button while moving the control handle ahead to the forward detent. The
horn indicates throttle only is engaged. Advance throttle to increase
engine RPM. To disengage, return the control handle to the neutral
position. Engine RPM is limited to prevent engine damage.
5. Stop/start button ‑ Allows the boat operator to start or stop the engine
without using the ignition key. The ignition key must be in the "ON"
position to start the engine.
6. Lanyard stop switch ‑ Turns the ignition off whenever the operator (when
attached to the lanyard) moves far enough away from the operator's
position to activate the switch.
a
FEATURES AND CONTROLS
a -
22964
3416
3414
Lanyard stop switch
28
eng