Cowl Removal And Installation - Mercury 200 Verado FourStroke Operation And Maintenance Manual

Cowl Removal and Installation

COWL REMOVAL
IMPORTANT: Most maintenance points are accessible by removing the top
cowl only.
1. Pull up on the top cowl lock latch.
2. Pull top cowl forward and lift off.
3. Pull lower cowl release latch up.
4. Remove rear cowl towards aft of outboard.
COWL INSTALLATION
1. Position lower cowl from aft side of outboard. Make sure it fits properly in
the rubber seal.
eng
MAINTENANCE
71
28946
28770