Mercury 200 Verado FourStroke Operation And Maintenance Manual page 92

b
a
Flo-Torq ll propeller with a hub bushing
a - Forward thrust washer
b - Hub bushing
c - Drive sleeve
d - Propeller
e - Drive sleeve adapter
f - Propeller nut retainer
g - Propeller nut
h - Raised pins
i - Tabs bent against the locknut
b. Place a block of wood between the gearcase and the propeller.
Tighten the propeller nut to the specified torque.
Description
Propeller nut ‑ propellers without a
hub bushing
Propeller nut ‑ propellers with a hub
bushing
c. Secure the propeller nut by bending the tabs of the retainer up against
the flats on the nut.
7. Flo‑Torq II HD solid hub (300–400 HD):
MAINTENANCE
c
82
d
e
f
h
g
Nm lb‑in.
75 –
136 –
i
45233
lb‑ft
55.3
100
eng