Mercury 200 Verado FourStroke Operation And Maintenance Manual page 41

FEATURES AND CONTROLS
Special Digital Throttle and Shift (DTS) Features
The DTS system features several alternate operational modes for the electronic
remote control (ERC) levers.
a
Item Control
Trim control
a
(handle)
b "Stop/Start"
c "Transfer"
d "Throttle‑only"
e "+"
f "–"
g "Dock"
h Neutral light
eng
Slim binnacle ERC
Raises and lowers the engine for best efficiency, or
for conditions such as shallow water, trailering, etc.
Allows the operator to start or stop the engine
without the use of the key switch. The key switch
must be in the run position for the start/stop switch
to function.
Allows boat control to be transferred to a different
helm.
Allows the boat operator to increase engine RPM for
warm‑up without shifting the transmission into gear.
Increases brightness settings for CAN pad,
VesselView and SmartCraft gauges.
Decreases brightness settings for CAN pad,
VesselView and SmartCraft gauges.
Reduces control lever operation throttle capacity to
approximately 50% of normal control lever throttle
demand.
Illuminates when the drive is in the neutral gear
position. The lights flash when the engine is in
throttle only mode.
31
STOP/
START
h
N
g
DOCK
TRANSFER
THROTTLE - ONLY
e
f
Function
b
c
d
52365