DENT Instruments ELITEpro XC Operator's Manual page 78

Clear Logger Sub-Menu
There are three options for clearing data stored in the Logger: Clear all logger data, Clear only peak
demand values (kW, kVA, & kVAR), or Clear only KWh, KVARh, KVAh, etc., totals. After the data is
deleted, it cannot be retrieved. See the section Clear Logger Sub-menu for more information.
Do not select any options until you are sure that all information should be deleted from the logger.
Clear ALL Logger Data

Clears all data in the logger memory, including Peak Demand and Totals. Once deleted, it cannot
be retrieved.
Clear ONLY Peak KW, KVAR, and KVA Demand...

Clears only the peak demand values, kW, kVA, & kVAR. Once deleted, it cannot be retrieved.
Clear ONLY KWh, KVARh, KVAh, etc. Totals...

Clears only cumulative totals. Once deleted, it cannot be retrieved.
Shop for Dent products online at:
78
PowerMeterStore
www.
1.877.766.5412
.com