Intelligent Command; Esc+Ik Media Feed Control - SATO S84EX Programming Reference Manual

15

Intelligent Command

15.1 Intelligent Command
15.1

ESC+IK Media Feed Control

Media Feed Control
Hexadecimal ESC
code
<1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Feed or backfeed the media for the specified length.
[Format]
<IK>a(,bbbb)
●Parameter
a[Feed direction] =
b[Feed length] =
[Coding Example 1]
<A>
<IK>0,120
<Z>
The printing starts from the current position when print data are received without returning to the original position with
<IK>1,120.
[Coding Example 2] Feed for one label
<A>
<IK>0
<Z>
IK Parameter
<49> <4B> a(,bbbb)
16 16
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
0 : Forward direction
1 : Backward direction
Valid range: Refer to the table on the next page (Omissible for forward direction)
One label will be fed when this parameter is omitted.
Before the command
After the command
After the command
Before the command
After the command
After the command
ESC+IK
Head position
(1)
(1) (2)
Feed 120dots for forward direction
Head position
(1)
(1) (2)
Feed for one label
268
(2) (3)
(3)
(2) (3)
(3)