SATO S84EX Programming Reference Manual page 131

[Notes]
1. The format of the parameter varies depending on the 1D barcode type. The segment width can be specified only with DataBar
Expanded Composite (CC-A/CC-B) (EU06).
The barcode height parameter can be specified only with GS1-128(UCC/EAN-128) (EU11, EU12).
2. Composite symbol will not be printed when the data matched to the composite symbol is not set to the data.
3. The print data parameter can be input up to 2361 digits for 1D data and 2D data, however, the data can be specified as 2D
data vary according to the 1D barcode type, and conditions such as the alphabet and numeric is mixed in the data. The
barcode may not be printed correctly when data exceeded the maximum digit.
4. The size of the composite symbol changes depending on the width of the narrow bar.
5. When the composite symbol exceeded the printable area, the part within the printable area will be printed. The composite
symbol may be read correctly by the scanner.
6. According to the specification of composite symbol, the height and width of the 2D code are adjusted by the 1D barcode data.
When the width of the 1D barcode is not enough, the composite barcode may not be printed even the data are less than the
maximum digit.
7. HRI printing can not be specified with this command.
8. The rotation command <%> is available, but enlarge command <L> is disabled.
9. Please specify a correct value for YYMMDD when specifying 11(manufactured date), 12(due date for payment), 13(packed
date), 15(sell-by date), and 17(warranty date) for application identifier. The print result is not guaranteed when the correct
value is not input.
10. Please specify the 2D code data according to the format of the application identifier when GS1 Databar is specified as the
barcode type.
11. GS1 DataBar Expanded Composite (CC-A/CC-B) is automatically stacked according to the segment width and data size,
and printed as GS1 DataBar Expanded Stacked (CC-A/CC-B).
12. The generation module has been changed for the quality improvement. The generated image may be different, however, the
reading result is the same.
Composite symbol 2D code-Code Table
B4 B3 B2 B1
0 0 0 0
0 0 0 1
0 0 1 0
0 0 1 1
0 1 0 0
0 1 0 1
0 1 1 0
0 1 1 1
1 0 0 0
1 0 0 1
1 0 1 0
1 0 1 1
1 1 0 0
1 1 0 1
1 1 1 0
1 1 1 1
* Please use '#'(23H) when specifying FNC1.
S
B8 0 0 0 0 0
B7 0 0 0 0 1
B6 0 0 1 1 0
B5 0 1 0 1 0
0 1 2 3 4
0 SP 0
1 ！ 1 A
2 " 2 B
3 3 C
4 4 D
5 % 5 E
6 & 6 F
7 ' 7 G W g
8
( 8 H
9 ) 9 I
A
* : J
B + ； K
C
, < L
D - = M
E ． > N
F / ？ O ＿ o
I S
0 0 0 1 1 1
1 1 1 0 0 0
0 1 1 0 0 1
1 0 1 0 1 0
5 6 7 8 9 A
P p
Q a q
R b r
S c s
T d t
U e u
V f v
w
X h x
Y i y
Z j z
k
l
m
n
123
O
1 1 1 1 1
0 1 1 1 1
1 0 0 1 1
1 0 1 0 1
B C D E F