Esc+2D12 Micro Pdf417 - SATO S84EX Programming Reference Manual

75.1 2D code
75.1 Micro PDF417

ESC+2D12 Micro PDF417

Hexadecimal ESC
code
<1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specify Micro PDF417.
[Format](setting part)
<2D12>,aa,bb,c,dd(,e)
●Parameter
a[Minimum module width]
b[Minimum module height]
c[Data codeword number per 1 line](Cols)
d[Lines per a symbol](Rows)
e[Binary mode specification]
[Format](data part)
<DN>mmmm,n～n
<DS>n～n
●Parameter
m[Number of data]
n[Print data]
[Coding Example] Module width: 02(dots), minimum module height: 04(dots)
data codeword number per 1 line: 1, lines per a symbol: 14
<A>
<V>100<H>200<2D12>,02,04,1,14
<DN>0010,0123456789
<Q>2
<Z>
[Notes]
1. Lines per a symbol is decided according to the data codeword number per 1 line.
Refer to the "Symbol size and number of data for Micro PDF417" in the next page.
2. Recommend to specify more than 2 dots for 8dots/mm, 12dots/mm, and more than 4 dots for 24dots/mm because the code
with the minimum module width and the minimum module height may not be read by a scanner.
3. The generation module has been changed for the quality improvement. The generated image may be different, however, the
reading result is the same.
2D12
<32> <44> <31> <32>
16 16 16 16
= Valid range
= Valid range
= Valid range
= Valid range
= 0
1
: When Binary mode specification is "Binary mode"
: When Binary mode specification is "Normal"
= Valid range
= data
ESC+2D12
Parameter
,aa,bb,c,dd(,e)
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
: 01~27 (dots)
: 01~72 (dots)
: 1~4
: 2 digits
: Normal, 0 when omitted (Omissible)
: Binary mode
: 0001~0366(bytes)
129