Esc+$= Print Of Outline Font - SATO S84EX Programming Reference Manual

38.1 Font
38.1

ESC+$= Print of Outline Font

Print of Outline Font
ESC
Hexadecimal
code
<1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specifying the print outline font.
[Format]
<$=>n～n
●Parameter
n[Print data] = Data
[Coding Example] Print data: SATO
<A>
<V>100<H>100<P>2
<$>A,100,100,1<$=>SATO
<Q>2
<Z>
[Notes]
1. Specify Shape of Outline Font <$> prior to this command.
2. Font height specification includes ascender and descender areas. For proportional pitch, letter size width of outline font varies
depending on the individual font.
3. Use Character Pitch <P> to specify font pitch.
4. The shape of Italic font is inclined 15-degree within font width specification. Font height specification includes ascender and
descender areas.
5. If specified dots in 1 ~ 9 of [Font shape] are tiny, they may be unrecognizable as a font.
6. In the Shape of Outline Font <$>, font width and height specification up to 24 dots are printable; however, some fonts may be
unreadable because of character crowding.
[Valid Commands]
Print position <V>
Modification <P>
Font <$>
Calendar <WA>
$= Parameter
<24> <3D> n～n
16 16
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
<H>
<%> <F>
<WU>
ESC+$=
59