Esc+Rd True Type Font - SATO S84EX Programming Reference Manual

39.1 Font
39.1

ESC+RD True Type Font

True Type Font
ESC
Hexadecimal
code <1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specifying CG font type, font style, font size, and print data.
[Format]
<RD>abc,ddd,eee,n～n
●Parameter
a[Font type] =
b[Character set] =
c [Font style] =
d[Horizontal length] =
e[Vertical length] =
n[Print data] =
[Coding Example] Font type: CG Times
<A>
<V>100<H>100<P>2
<RD>A00,P10,P10,SATO
<Q>2
<Z>
[Notes]
1. Set font size in [dot specification] or [point specification].
2. Dot size varies depending on the head density. Refer to the table below.
Head density
8dots/mm (203dpi)
12 dots/mm (305dpi)
12 dots/mm (609dpi)
3. One point is 0.35mm.
4. When using TTF that is downloaded with dedicated tools, make sure to specify appropriate card slot with the command <CC>
before this command.
[Font size range]
Head density
8dots/mm (203dpi)
12 dots/mm (305dpi)
12 dots/mm (609dpi)
RD Parameter
abb,ccc,ddd,n～n
<52> <44>
16 16
abc,ddd,eee,n～n
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
A [CG Times]
B [CG Triumvirate]
C [SATOGAMMA] (Code page can be switched by ESC+CE command)
D [SATOVICA] (Code page can be switched by ESC+CE command)
E-Z,a-z TTF downloaded with the dedicate tool
0 (No specification for the character set(Fixed))
Refer to the code page parameter in the next page.
0 [Standard]
1 [Bold]
2 [Italic]
3 [Bold+Italic]
004 to 999 (dot specification)
P02 to P99 (point specification)
004 to 999 (dot specification)
P02 to P99 (point specification)
Data
1 dot size (mm)
0.125
0.083
0.042
Valid range (dots)
Horizontal line length
4 to 832
5 to 999
9 to 999
ESC+RD
[Font type A or B].
[Other than font type A or B]
Vertical line length
4 to 999
5 to 999
9 to 999
61