Intelligent Command - SATO M8485Se Programming Reference Manual

INTELLIGENT COMMAND

DIVIDED MOTION SPECIFICATION
FUNCTION To issue a tag with a special marking so that it can easily be divided on the stacker. Only
applicable to the XL400/410e printers.
FORMAT <ESC>Ia
Place immediately following the <ESC>A command.
EXAMPLE
<ESC>A
<ESC>I1
<ESC>V100<ESC>H200<ESC>P2<ESC>L0202<ESC>XMABCD
<ESC>Q5
<ESC>Z
OUTPUT
(4-66)
NOTES When using the divided mark method and <ESC>Q is more than two pieces, place a black divided
mark on the edge of the first piece of label.
When using the separator method and the cut motion is available at the tag (center hold, horizontal
hole, angle R, eye-mark), the tag will be 12mm longer than normal length of the first piece of label and
the second tag wil be 12mm shorter than the first.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Divided motion type
1: Divided mark type
2: Separator method
4-100
PN: 9001096B