Event Log - Bentel Security KYO 320 User Manual

+
NOTE: You must call your Instal ler if any zo nes si -
gnal Tam per or Short-cir cu it.
1. Use A and B to scroll the zo nes of the Par ti tions com -
mon to the Key pad and User Code con cer ned.
zone n. 002
sitting room
2. Press the ENTER key to se lect the re qui red zone.
The di splay will show the zone sta tus, as fol lows
Sit ting room
STBY UNBYPASSED
3. Using the ON and OFF keys UNBYPASS (turn ON)
or BYPASS (Turn OFF) the zone, as re qui red.
4. Use A or B to scroll the zo nes and con ti nue, or press
the ESC key twi ce to step back to the User menu.
+
Attempts to Arm (turn ON) the Par ti tions when zo -
nes are Bypas sed or in Alarm sta tus will ac ti va te
the Zo nes sta tus list au to ma ti cally. Only the zo -
nes that are abo ut to be Armed will be in clu ded in
the list.
+
You can Bypass a Zone using a 6-di git User Code
PIN, as fol lows: — type in a va lid 6-di git User Code
PIN fol lo wed by the 3-di git ID num ber of the Zone
con cer ned then press ESC. For exam ple, if the
PIN is 135790 and you want to Bypass Zone 23,
type in 135790 023 then press ESC.
n Event Log
This com mand will al low you to view and print the
events in the Event Log. The Con trol pa nel Event log
can sto re up to 10,000 events. The events will be sto red
in chro no lo gi cal or der —star ting from the most re cent.
Each event shows the fol lo wing de ta ils:
ØEv. (Event num ber)
ØTYPE (e.g. Zone Alarm, Inva lid Code, etc.)
ØIDENT (e.g. Zone num ber, Par ti tion, etc.)
ØAGENT (e.g. Key pad, Re a der, etc.)
ØID.AGEN (e.g. User code, Card/Key, etc.)
ØTIME (Time and Date of the event)
The di splay will show the fol lo wing mes sa ge:
EVENT LOGGER
From Last ...
To view all Events
Press the ENTER key to view all the Events in the
Log—star ting from the most re cent (from last . . ).
Use A and B to scroll the Events.
Press D to view the Event de ta ils (see abo ve).
To view Events from a spe ci fic Date
12
EVENT LOGGER
starting from..
Using A or B scroll for the fol lo wing mes sa ge:
Press the ENTER key, the di splay will show the Date
prompt.
Star ting from..
10/09/2006
Enter all the di gits of the re qui red Date (DD/MM/YYYY),
then press the ENTER key.
Use A and B to scroll the Events.
Press D to view the Event de ta ils (see abo ve).
Ev.00015 TYPE
Va lid code
+
The di splay will show the re le vant de ta ils for each
Event. For exam ple, Tam per Events show the
TYPE and TIME only.
To print Events from a spe ci fic Date
Using A or B scroll for the fol lo wing mes sa ge:
EVENT LOGGER
print from..
Press the ENTER key, the di splay will show the Date
prompt.
Star ting from...
10/09/2005
Enter all the di gits of the re qui red Date (DD/MM/YYYY),
then press the ENTER key.
The Key pad will exit the USER MENU, and the Prin ter
will print the Events star ting from the en te red date to the
most re cent.
+
This fa ci lity is pro vi ded by the op tio nal K3-PRT2
Prin ter Inter fa ce (ask your Instal ler for de ta ils).
The Event Log
The Event log is set up as fol lows:
Ø the Event num ber (Ev.) is shown on the left side of
the first line;
Øthe Event de ta ils (TYPE, IDENT., USER, USER ID,
TIME) are shown on the se cond line.
Ev.00015 TYPE
Valid code
Using the Event Log:
Ø Use A and B to scroll the Events.
Ø Press D to view the Event de ta ils (see abo ve).
ØPress the e to step back to the Event Log menu.
KYO320