Imps 4000 Connections; Sps 4001B Connections - Emerson Oxymitter 5000 Instruction Manual

Instruction Manual
IM-106-350, Rev 2.2
July 2008
IMPS 4000
CONNECTIONS
SPS 4001B
CONNECTIONS
See the IMPS 4000 Intelligent Multiprobe Sequencer Instruction Manual for
wiring and pneumatic connection.
See the SPS 4001B Single Probe Autocalibration Sequencer Instruction
Manual for wiring and pneumatic connection.
NOTE:
Upon completing installation, make sure that the Oxymitter 5000 is turned on
and operating prior to firing up the combustion process. Damage can result
from having a cold Oxymitter 5000 exposed to the process gases.
During outages, and if possible, leave all Oxymitter 5000 units running to
prevent condensation and premature aging from thermal cycling.
If the ducts will be washed down during outage, MAKE SURE to power down the Oxymitter
5000 units and remove them from the wash areas.
Oxymitter 5000
2-19