Remote Electronics Installation - Emerson Oxymitter 5000 Instruction Manual

Oxymitter 5000
Remote Electronics
Installation
Figure 2-8. Remote Electronics
Mounting
Figure 2-9. Installation with Drip
Loop and Insulation Removal
Replace Insulation
after Installing
Oxymitter 5000
Insulation
2-10
For an Oxymitter 5000 equipped with remote electronics, install the probe
according to the instructions in "Probe Installation". Install the remote
electronics unit on a stand pipe or similar structure, Figure 2-2.
Adapter
Plate
Line
Voltage
Stack or Duct
Metal Wall
Instruction Manual
IM-106-350, Rev 2.2
July 2008
Logic I/O,
Fieldbus Digital
Signal
Drip
Loop