Emerson Oxymitter 5000 Instruction Manual page 43

Instruction Manual
IM-106-350, Rev 2.2
July 2008
Section 2
http://www.raihome.com
Installation
Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Electrical Installation (with Integral Electronics) . . . . . . . page 2-11
Electrical Installation (with Remote Electronics) . . . . . . . page 2-14
Pneumatic Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-17
IMPS 4000 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-19
SPS 4001B Connections . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-19
Before installing this equipment, read the "Safety Instructions" for the wiring and installation
of this apparatus in Appendix A of this Instruction Manual. Failure to follow safety
instructions could result in serious injury or death.
Install all protective equipment covers and safety ground leads after installation. Failure to
install covers and ground leads could result in serious injury or death.
The Oxymitter 5000 (OXT5A) can be installed in general purpose areas only. Do not install
the OXT5A in hazardous areas. For hazardous areas use the OXT5C.
Oxymitter 5000