Emerson Oxymitter 5000 Instruction Manual page 49

Instruction Manual
IM-106-350, Rev 2.2
July 2008
Figure 2-5. Oxymitter 5000
Adapter Plate Installation
INSTALLATION FOR METAL WALL
STACK OR DUCT CONSTRUCTION
Mounting holes
o
shown rotated 45
out of true position
Weld or bolt mounting plate to metal wall
of stack or duct; Joint must be air tight.
Weld or bolt adapter plate to
metal wall of stack or duct.
Joint must be air tight.
Notes: 1.
Dimensions are in
millimeters in parentheses.
2. All masonry stack work and joints except adaptor
plate are not furnished by Rosemont Analytical.
0.50 13 ( )
3.75 95 ( )
Minimum Dia
hole in wall
Stack or duct
metal wall
2.50 (63,5)
Minimum Dia
hole in wall
Stack or duct
metal wall
inches with
INSTALLATION FOR MASONRY
WALL STACK CONSTRUCTION
Bolt mounting plate to
outside wall surface
Field weld pipe
to adapter plate
Mounting Holes
o
shown rotated 45
out
of true position
Joint must
be air tight
Outside wall
surface
Bolt adapter plate to
outside wall surface
Joint must
be air tight
Outside wall
surface
Oxymitter 5000
0.50 13 ( )
4.50 114 ( )
O.D. Ref
Pipe 4.00 in. Sched 40 Pipe
Sleeve (Not by Emerson
Process Management)
length by Customer
Masonry
stack wall
Field weld pipe
to adapter plate
3.5 (89)
O.D. Ref
Pipe 3.00 in. Sched 40 Pipe
Sleeve (Not by Emerson
Process Management
length by Customer
Masonry
stack wall
)
2-7