Disconnect Your Headset; Using Bluetooth Headsets With Vvx 600 Phones - Polycom VVX 201 User Manual

When you are in an active call and you receive an incoming call, you cannot use the hookswitch control on
your headset to place the active call on hold and answer the incoming call. Pressing the hookswitch control
on the headset ends the active call and answers the incoming call. To place the existing call on hold and
answer the incoming call, answer the call on your phone.

Disconnect Your Headset

If you want to disconnect or change your headset, you need to properly detach your headset from your
phone.
T
ASK
1 Navigate to Settings > Basic > Preferences > Headset > Hookswitch Mode.
2 Select Regular Mode.
3 Remove the EHS adapter from the serial port on the back of the phone.

Using Bluetooth Headsets with VVX 600 Phones

VVX 600 phones support Bluetooth headsets as well as analog and USB headsets. If your system
administrator has enabled Bluetooth capability for your phone, you can use a Bluetooth headset to handle
calls. When a Bluetooth headset is connected and in use, the headset key
multiple types of headsets connected to your phone, the Bluetooth headset is used automatically for all
calls.
This section provides you with information on how to enable Bluetooth on your VVX 600, how to pair and
connect your Bluetooth headset, how to use your Bluetooth headset with your phone, and how to
disconnect and remove your headset.
Enable Bluetooth and Connect a Headset
In order to use a Bluetooth headset with your phone, you need to enable Bluetooth, pair your headset, and
connect your Bluetooth device to your phone. You can pair up to four Bluetooth headsets with your phone;
however, you can connect only one headset at a time.
The following instructions are intended as a guide, and do not apply to all Bluetooth devices. You can usually
find instructions for your headset on the device manufacturer's web site.
T
ASK
1 Navigate to Settings > Basic > Bluetooth Settings > Bluetooth Radio.
The Bluetooth Radio screen is displayed.
2 Tap On.
The Bluetooth icon
your Bluetooth headset.
3 Turn your Bluetooth headset on and place the headset in Discovery mode.
Refer to your headset documentation for information on how to place your headset in discovery
mode.
4 Navigate to Settings > Basic > Bluetooth Settings > Manage BT Headsets.
5 Tap Scan to find your headset.
Polycom, Inc.
(Adapted by Atlantic Broadband)
is displayed in the status bar. After the icon displays, you can pair and connect
Phone Accessories
glows blue. If you have
94