Flashforge Inventor User Manual page 49

5. Click on [ Work Mode ]
6. Click on [ STA Setting
password and save.
7. Restart the interface, close the page, turn off the Inventor, disconnect from the
network, and wait for 10 seconds.
8. Turn the Inventor back on and connect to the Inventor network. In FlashPrint,
choose [ Print ] from menu and select
9. Under "Connection
Wi-Fi, and enter the
Inventor User Guide | www.flashforge.com
and choose"AP+STA
], select a working network, enter the corresponding
[ Connect
Mode", select
"IP Address, Port" as shown on printer LCD screen. Then, click
6-21
mode" and save it.
6-22
].
49
0086‐ 0579‐82273989