Flashforge Inventor User Manual page 27

2. （5-2）Take out the leveling card (QR-Code for leveling video can be scanned)
3. （5-3）Once the extruder and build plate stops moving, slide the piece of paper
continuously back and forth between the nozzle and the build plate. And
simultaneously adjust the knob just enough so that the paper causes a slight friction.
4. （5-4）Press [ NEXT ]
Slide the paper back and forth again, and adjust the screw to create the same amount
of friction as the previous step.
Inventor User Guide | www.flashforge.com
5-3
5-4
and wait for the extruder to move to the second position.
5-5
27
0086‐ 0579‐82273989