Flashforge Inventor User Manual page 31

Cut the model into several parts
Print it directly with your Inventor or export to your USB stick.
6.2.3 Loading
You can load a model file or Gcode file into your Flashprint by the following six
methods:
Method 1: Click the
object file.
Method 2: Select the file for loading and drag the file to the main interface of the
software.
Method 3: Click [File]--[Load
Method 4: Click [File]--[Examples]
Method 5: Click [File]--[Recent Files]
Method 6: Select and drag the target file to the icon of Flashprint.
Note: .STL, .OBJ, .3MF and
Flashprint for editing.
Generating Rilievo
Loading a png, jpg, jpeg, bmp picture file into the FlashPrint. And the following
dialogue box(6-4) will pop up. The setting box includes settings for shape, mode,
maximum thickness, base thickness, bottom thickness,width, height, top diameter and
bottom diameter.
Shape: including plane, tube, canister and lamp.
Mode: including "darker is higher"and "lighter is higher".
Maximum thickness: Z value of the model
Base thickness: The minimum raft thickness and the default value is 0.5mm
Inventor User Guide | www.flashforge.com
Load icon
File]. Then select the object file for loading.
to load the example files
to load the files opened recently.
.FPP, ways to store 3D models, are supported by
on the main interface. Then select the
31
0086‐ 0579‐82273989